Projects
- Projects Index
- Audiovox Projects ...
- Danelectro Projects ...
- Fender Projects ...
- Gibson Projects ...
My projects are generally inspired by classic designs, but with a twist. I like to build things like basses on guitar bodies, non-standard scale lengths, and occasionally originals, and experiment with materials, finishes, and electronics. One of my great interests is driving the cost out of luthiery by sourcing parts and materials from the hardware store. I prefer to build more guitars than simply more-expensive guitars.
However, if you look at the projects listed here, you'll find that I am building real instruments, not junk or jokes ( although some of them are kind of humorous. )
The projects are classified according to what inspired them.
All Projects | All Basses | All Guitars
Under Construction
Projects Sampler
21" neck, adjustable bridge with piezo saddle, active electronics. EBay body. Now has metal-wound strings.
More: Stratocaster Uke Bass ...
This bass is a 21" scale, with a piezo saddle mounted in an adjustable bridge. The soundhole is just for looks. The strings are metal-wound Kalas. The fretboard is cut out of the ugliest piece of wood I ever received. For such a small neck, I managed to cut around most of the ugly, and the result isn't half bad.
More: Audiovox Uke Bass ...
This Strat bass is another of my early projects, an evolution of the first one. It uses basically the same neck, but mounted in the stock guitar neck pocket. This moves the bridge position adjacent to the old tremolo hole, but the expansive Mustang bridge plate covers it nicely. The pickguard looks stock, but is actually custom-made to cover the six stock bridge screw holes. If you can't get a Mustang bridge ( and you can't any more, ) you could extend the pickguard to cover all the guitar holes, or use a stock pickguard and just make a small bridge-sized cover. Or just leave the tremolo hole and keep your stash in it.
More: Stratocaster Bass 2 ...
