Here is a Montaya that sold on eBay not long ago, for about $40. It looks very clean, probably spent most of its life under a bed.
I remember the real wood thumbrest. Take that, Fender !!! I think these things were actually made in the USA.
If I had seen this go up for sale, I probably would have gone after it, just for nostalgia. But the truth is, the SX is a much better instrument.
These are the rest of my experiments and a few modified factory pieces.
More: Miscellaneous Projects ...
This is the angled headstock jig I built from pine scrap, with an already-cut piece of 5" Home Depot maple headstock material attached with clamps. Basically, this jig is a 90-degree square brace, as precise as I could build it. It is square in all three dimensions, the most important being the vertical direction. The final stage of construction of the jig was to smooth all the surfaces on the sander, true up the saw, and then true-up the jig face by shaving it with the saw. You can see that the angle of the headstock is easily selected on the saw. The accuracy of this angle is not critical, as long as you are in the ballpark, anything will work.
More: Angled Headstock Jig ...
Questions or Inquiries?
Just want to say Hello? Sign the .