Spraying
Black Polyurethane body. This is during the polishing process, you can see it is not even clean. The front came out like black glass. I smoothed the orange-peel with 1500 grit wet, then 2000 and 3000. Then I switched to the random orbital with a red sponge cutting pad and Turtle Wax rubbing compound that claims to remove 1200 scratches. Shouldn't be any 1200 scratches, since I started with 1500. That came out shiny, but with swirl marks in the light. Then I switched to another red cutting pad with Meguiar's Ultimate Compound, and finally a softer yellow pad with the same Meguiar's. At that point, it was pretty much a factory finish. I didn't work as hard on the back, it is nice, but will soon enough encounter a zipper or belt buckle, so the effort would be wasted.
More: Finishing ...
This is a fret slot cleaning tool that I made from my old favorite steel packing strap in about 5 minutes. Once again, the inspiration is the StewMac catalog, where their tool is much nicer, and about $15. I ground the strap to a hooked point on the bench grinder and made the handle from popsicle sticks and tape. My tool is double-ended, very similar to my binding scrapers. The material is nearly the right thickness, a few passes on a file and it was perfect. The edges are all square, so the tip is a tiny chisel.
More: Fret Slot Cleaning Tool ...
Questions or Inquiries?
Just want to say Hello? Sign the .