Eden paddle-head guitar neck converted to bass. Strings are lower four of 5-string set, unwound to fit 25" scale.
More: Stratocaster Micro Bass 1 ...
Fender (2/2)
Fender Jazzmaster Bass 1
Fender Jazzmaster Bass 2
Fender Jazzmaster Bass 3
Fender Stratocaster Bass 1
Fender Stratocaster Fretless Bass
Fender Stratocaster Bass VI
Fender Stratocaster Bass IV
Fender Stratocaster Bass 2
Fender Stratocaster Micro Bass 1
Fender Stratocaster Micro Bass 2
Fender Stratocaster 12-string Guitar
Fender Stratocaster Uke Bass
Fender Telecaster Bass
SX Precision Bass
As everyone should know, the Stratocaster guitar is actually the guitar version of the Precision Bass, which came first. The big innovation on both was the extended upper horn, a necessity on a long-necked bass for balance and to bring the low frets within reach when the instrument is hanging on a strap. Not strictly needed on a guitar, but looks great, and back in the 1950s nothing had ever been seen like it. It was an instant hit.
More: Fender Projects ...
Originally all red, refinished in black burst. Eden paddle-head guitar neck converted to bass. Strings are lower four of 5-string sets, unwound to fit 25" scale.
More: Stratocaster Micro Bass 2 ...
21" neck, adjustable bridge with piezo saddle, active electronics. EBay body. Now has metal-wound strings.
More: Stratocaster Uke Bass ...
This is my attempt to recreate my very first bass, a "Montaya", as well as one of my first ventures into 'modding'. These SX's are great instruments. For 109 bucks you get an alder body with a beautiful 3-tone sunburst, a decent neck, functional bridge & tuners, and a flawless finish. What you don't get is any kind of useable pickups or strings. On this one, I installed a USA Fender pickup, my favorite d'Addario strings, and gave it a careful fret dressing and setup. I also added the tortoise pickguard, rosewood thumbrest, and ashtray for the looks only. At the time, I was going purely from memory, but I later found a picture of the original, and I got it dead right.
More: SX SPB-57 Precision Bass ...
I have several jigs I made to fit my full-sized DeWalt router. That machine is a beast for building furniture and stuff, but it is clumsy overkill for routing neck pockets and truss rods. So I got the idea to make a base plate that will adapt the little router to the jigs I made. Simple - just a 6" square; there it is on the left. The material is a piece of 1/4" phenolic that I had laying around for years. Phenolic resin is a plastic that is so hard and stiff it is more like metal. It is perfect for router bases and other fixtures, but somewhat hard to work. To drill the big hole in the center, I had to shift the drill press to its lowest gear, and cool the bit with water.
More: Routing & Shaping ...