This is my tiny bench grinder, with a Dremel attachment (removable). This thing is worth its weight in gold. Grinds, buffs, and does everything the Dremel will do, better. $37.99 Harbor Freight.
Compare to a full-sized grinder. This is also very useful.
I have several jigs I made to fit my full-sized DeWalt router. That machine is a beast for building furniture and stuff, but it is clumsy overkill for routing neck pockets and truss rods. So I got the idea to make a base plate that will adapt the little router to the jigs I made. Simple - just a 6" square; there it is on the left. The material is a piece of 1/4" phenolic that I had laying around for years. Phenolic resin is a plastic that is so hard and stiff it is more like metal. It is perfect for router bases and other fixtures, but somewhat hard to work. To drill the big hole in the center, I had to shift the drill press to its lowest gear, and cool the bit with water.
More: Routing & Shaping ...
This is what I've settled on for the neck. The main part is plain maple from Home Depot. The headstock wings are leftover floorboard from the upright project, Brazilian Cherry. The fretboard is also Brazilian Cherry. The truss rod is 540mm, which will require a 21 fret neck. Or I could cut it down a bit and weld the ends back together, but that's more work.
More: Radiatabacker Part IIb ...
Questions or Inquiries?
Just want to say Hello? Sign the .