You can build a guitar with just a jigsaw. It will do everything you need to do, it just won't do it as well as a scroll saw or bandsaw. The biggest problem with a jigsaw is that the blade is only fixed at one end. It stays fairly perpendicular when cutting straight, but will get pretty crooked cutting curves, especially in thick materials. If you are going to use a jigsaw, cut well outside your lines and sand-in.
I took a drive over to Harbor Freight - purveyor of fine {sarcasm} Chinese tools & hardware - and picked up this little drill press. With a coupon, it cost me just over fifty bucks. This is not what I would call a good drill press, in fact, it is pretty crappy. The base and the table are stamped, not forged, and small. The quill travel is a measly two inches, parts that should be steel are aluminum, parts that should be aluminum are plastic, vibration is excessive, and the 3/8" chuck has a disconcerting wobble to it. I knew all that when I bought it, and I never would have if I did not already have a much better one, or at least a decent one. What I wanted from this drill press is small size and lightweight, so I can add it to my inside workstation, and not have to leave the heat/ac to go drill a hole in the garage. This press weighs well under 40 pounds and doesn't take up too much space on my inside workbench. My 'good' drill press is not something you'd want to move around a lot.
More: Drill Press ...
Questions or Inquiries?
Just want to say Hello? Sign the .