Doing Things Wrong

Hand Saws

image

Here is a terrific little saw handle that takes Sawzall blades. It comes with an array of blades, including the dangerously sharp flush-cut and rather dodgy drywall blades, and a few others that I've long since used up, but it will fit any Sawzall blade. But what really makes this thing great is when I started making my own blades - all the small ones along the right. I cut these from much larger Sawzall blades that I bought, using an angle grinder, and shaping them on the bench grinder. Sawzall blades all cut on the pull stroke, but as you can see, two of these blades cut on the push stroke, because I cut them reversed from the parent blade. The tangs are easy to make. Push blades are good for cutting through finished or laminated surfaces. These little blades give me a hand-held jigsaw, very useful for many loothery tasks. This saw is a Craftsman, so you better hustle on down to your local Sears and get one before it closes. Mine is on the death list. StewMac should pick up this idea.

The hairbrush is something else. Have you ever been sanding something, and the sandpaper gets all gummed up? You know it's still sharp, but what can you do? An old hairbrush is perfect for cleaning sandpapers, and even belts. How much do you think StewMac would charge for a hairbrush, er, "luthiery abrasive restorer"?

I pick on StewMac, but only because I love 'em.

Update: You can get this tool at Lowes, branded Cobalt, and Home Depot - DeWalt.

image
A bigger hand saw that gets a lot of use

.


Comments on Hand Saws

Questions or Inquiries?

Just want to say Hello? Sign the .

Submit a Comment

Your email address will not be published. Required fields are marked *


Click image to replace if unable to read.

Enter the digits from the image above, except for the last one:

This site uses Akismet to reduce spam. Learn how your comment data is processed.


Minor dings in bare wood can often be popped out by applying a bit of boiling water, which will swell the grain. If water doesn't work, try heated acetone. Place a small container of acetone in a large container of hot water to heat it, away from any ignition source. Steam will also work - to fix up large areas, use an iron on low over a damp towel. I have even gotten the hot water trick to work through a finish, but there is no telling what the result may be, and I don't recommend trying it.

Printed from luthierylabs.com