Doing Things Wrong

KMise Wireless Transmitter

Transmitter, the receiver is almost identical.

First, I am bound to state that I received this item at no cost for review. Having gotten that out of the way …

I always wanted to try a wireless transmitter, so when lotmusic offered me this one for review, naturally I accepted. The design is simple. An internal battery in each piece is charged by USB, Y-cable provided. A mechanical on/off switch conserves power.

Wireless transmission is on the ubiquitous 2.4 GHz band, the same as many other things including Bluetooth, Wifi, and microwave ovens. This makes it prone to interference, at least in theory. In practice, I have not had any issues, nor needed to change the wireless channel.

The sound is clear and strong, with no noise, as you would expect from a digital connection. Sounds fine with both guitar and bass. Also, and perhaps most important, there is no discernable delay, as you often get with Bluetooth audio.

The only drawback is the lack of a hinge on the plug. Depending on your guitar, this leaves the sender unit jutting out at an awkward angle where it really looks like it is in harm's way. Probably not good for wild stage antics. Also not so good for seated playing. However, units with such a hinge cost considerably more, and if you just want something for bedroom use, this is fine. You could also use a short extension cord and put it in your pocket.

Finally, it does fit a recessed Strat jack. So if you are on a budget and can be a little careful with it, recommended. Buy on Amazon:

https://amazon.com/gp/product/B0875VMN6L?ref=ppx_pt2_dt_b_prod_image


You can build a guitar with just a jigsaw. It will do everything you need to do, it just won't do it as well as a scroll saw or bandsaw. The biggest problem with a jigsaw is that the blade is only fixed at one end. It stays fairly perpendicular when cutting straight, but will get pretty crooked cutting curves, especially in thick materials. If you are going to use a jigsaw, cut well outside your lines and sand-in.