So Far, So Good ~ Luthiery Laboratories

March 1, 2020

So Far, So Good

March 1, 2020

I started assembling the Mosrite, finally. The routs are all so precise that I had to spend quite a while filing polyurethane out of them to make the neck and pickups fit again. Then I had to chisel out the pit for the output jack. You can see my solution for grounding the four individual bridges - a strip of aluminum tape, the same stuff as on the back of the dry-erase pickguard.

And it all fits together, and I'm going to bed. I'll assemble the neck tomorrow.

Uncategorized, 03/1/20

« KMise "Crunch" Distortion Pedal « » All Together Now »

Mosrite Bass

This one went through a long and torturous build process over almost two years. All I can say is don't believe the "advice" you find on talk_ass. However, in the end, it turned out to be a pretty nice instrument.

More: Mosrite Bass ...

Fretboard Radiusing

I make all my fretboards 12 inches, guitar or bass, fretted or fretless. I just like that, and also, it doesn't matter that much as long as you stay away from the extremes. 12-inches is a nice comfortable curve for chording on, and also doesn't require as much work and mess to carve as a smaller radius. I find it is a good compromise overall. I can make a 12-inch radius from flat pretty successfully with just a sanding block. StewMac's pre-radiused boards are 16-inches and are quick and easy to re-radius to 12. Although I made tooling for everything from 7 to 16, I don't use any of it. Luckily, I made extra tooling for 12 inches before I broke down the manufacturing plant.

More: Fretboard Radiusing ...