Doing Things Wrong

Finally put this back together

I got all the electrics reconnected on the Kubickish bass. The switch at the lower-right has 13 connections coming and going; luckily I drew a diagram of the whole thing before I took it apart. The switch controls the mode of the pickups - coils in series or parallel. There is also active bass and treble controls, with a passive backup mode.

And now for the mechanicals. Everything went back together easily. I installed a couple of dings in the front when I dropped a pickup, but they are not noticeable. I think the Radiata glue-up looks fantastic.

Some final polishing with Meguiars and Pledge, and it looks nice and shiny. You might notice it is missing the 'Factor' badge under the pickguard. That is printed on thin delicate transparency material, and I put it away someplace safe. Too safe, apparently. No matter, I can print a new one, I will need a second one for the guitar anyway. Coming up next ...


Comments on Finally put this back together

Phil:

June 26, 2020 at 7:56 AM

Love your blog. That body looks incredible.

Comments on Finally put this back together closed.

Questions or Inquiries?

Just want to say Hello? Sign the .


The 1/2" flush-cut router bit came today. I mic'ed it, and it is just a few thousandths shy of 12.7mm. I put my old 3/8" / 9.5mm bearing on it, with a spacer I made from a tiny washer, and did a test cut. Then I swapped the bearing for 10mm and did another. These Yonico bits are nice because they color-coordinate with DeWalt tools !