March 3, 2020
March 3, 2020
All assembled and strung up with D'Addario round-wounds. The action fell into place with just a little adjusting. I set the intonation with a yardstick, which works better than you'd think. Add 3/16" for the E string, 0 for the G, and split the difference in between.
Apart from testing the wiring, I have not yet plugged it in. I'm going to let it settle under tension for a week or two.
This one went through a long and torturous build process over almost two years. All I can say is don't believe the "advice" you find on talk_ass. However, in the end, it turned out to be a pretty nice instrument.
More: Mosrite Bass ...
A conversion neck is one that can convert an instrument from one scale length to another with no other modification. A common conversion is 34" to 32". By overhanging the 20th fret, or leaving it off, you can use the stock bridge location on the body, just adjust for intonation. Such a neck will work on any standard bass body. A conversion from 34" to 30" requires overhanging two frets, or losing one or both.
More: Conversion Necks ...