"Tonewood" ~ Luthiery Laboratories

"Tonewood"

This really puts a dent in the whole tonewood argument.

I doubt there is anything very special about those piezos. My experience is that you need the right mounting and electronics to make a piezo sound good, and it has very little to do with the sensor itself, which is just a little bit of semiconductor.

To sound good, a piezo needs to be incorporated directly in the physical support of the strings. And it requires a very high output impedance, otherwise, it turns into a high-pass filter. Both of these are especially true on a bass.

I have to wonder where he got such a great-sounding brick. Home Depot, or Lowes? Or do you have to get your rock-tone from some specialty loothery supplier?

When I run out of plywood and masonite, I'm going down to Loothery Depot and pick up a 50-pound bag of ToneCrete. I will experiment with different mixes, aggregates, and colors, always testing in the most subjective and un-repeatable manner possible, as is luthiery tradition. As always, I will report my results here in Luthier's Corner.

I'll save you some time ... they all sound the same.

I want to see a comparison of different shirt materials, straps, belt buckles, and beer guts.

Either you believe in tonewood, or you don't.

Tonewood is marketing nonsense.

Woods etc

Here at Luthiery Labs, we're only interested in woods that are reasonably priced and locally available.

Wood Notes:

Since the gubment made rosewood illegal, ** despite the fact that there is no real definition of what rosewood is, alternative fretboard woods are going to become more mainstream in loothery. Bubinga is also illegal now, but that's no great loss.

** For a while, no longer

More: Woods etc ...

January 4, 2023

It's All Bullshit

January 4, 2023

Here is a series of videos from a guy who has done the most scientific testing of electric guitars and amplifiers that I have yet to find. His results surprise even me. I have always felt that "tone" is mostly imagination, but these carefully constructed tests show that it is entirely imagination.

More: It's All Bullshit ...

Comments on "Tonewood"

Questions or Inquiries?

Just want to say Hello? Sign the .

Submit a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Finishing

Black Polyurethane body. This is during the polishing process, you can see it is not even clean. The front came out like black glass. I smoothed the orange-peel with 1500 grit wet, then 2000 and 3000. Then I switched to the random orbital with a red sponge cutting pad and Turtle Wax rubbing compound that claims to remove 1200 scratches. Shouldn't be any 1200 scratches, since I started with 1500. That came out shiny, but with swirl marks in the light. Then I switched to another red cutting pad with Meguiar's Ultimate Compound, and finally a softer yellow pad with the same Meguiar's. At that point, it was pretty much a factory finish. I didn't work as hard on the back, it is nice, but will soon enough encounter a zipper or belt buckle, so the effort would be wasted.

More: Finishing ...