Doing Things Wrong

KMise Wireless Transmitter

Transmitter, the receiver is almost identical.

First, I am bound to state that I received this item at no cost for review. Having gotten that out of the way …

I always wanted to try a wireless transmitter, so when lotmusic offered me this one for review, naturally I accepted. The design is simple. An internal battery in each piece is charged by USB, Y-cable provided. A mechanical on/off switch conserves power.

Wireless transmission is on the ubiquitous 2.4 GHz band, the same as many other things including Bluetooth, Wifi, and microwave ovens. This makes it prone to interference, at least in theory. In practice, I have not had any issues, nor needed to change the wireless channel.

The sound is clear and strong, with no noise, as you would expect from a digital connection. Sounds fine with both guitar and bass. Also, and perhaps most important, there is no discernable delay, as you often get with Bluetooth audio.

The only drawback is the lack of a hinge on the plug. Depending on your guitar, this leaves the sender unit jutting out at an awkward angle where it really looks like it is in harm's way. Probably not good for wild stage antics. Also not so good for seated playing. However, units with such a hinge cost considerably more, and if you just want something for bedroom use, this is fine. You could also use a short extension cord and put it in your pocket.

Finally, it does fit a recessed Strat jack. So if you are on a budget and can be a little careful with it, recommended. Buy on Amazon:


Cabinet-grade plywoods are ideal for guitar faces. Maple, birch, oak, and many other woods are available from your local home supplies store. For hollow-body faces, 1/4" plywood or thinner is used. When using plywood for faces, you must take care not to sand through the surface ply.

Printed from luthierylabs.com